On watchIndependent · Reader funded · No paywall
Local · 16:22

7 Signs Your Patio Needs a Professional Pressure Clean

By @cesaruowf048

Perth patios collect windblown sand, garden debris, barbecue grease and organic growth. Over time, this build-up can make paving slippery, hide its original colour and leave stains that ordinary hosing cannot remove. Recognising the warning signs helps you arrange cleaning before contamination becomes harder to treat.

Professional patio cleaning should match the surface, not simply use the highest pressure. Concrete, brick pavers, limestone and other natural stone require different cleaning methods to avoid damage.

1. The Surface Feels Slippery When Wet

A patio that becomes unusually slick after rain or watering may have algae, organic residue or greasy deposits. Shaded areas beside garden beds and beneath outdoor furniture are particularly susceptible.

Keep people away from slippery patches until they are treated. A professional can assess whether the surface needs a suitable cleaning solution, controlled pressure or both. If water regularly pools in the same location, address the drainage issue as well; cleaning alone will not prevent recurring growth.

2. Green or Dark Growth Keeps Returning

Green films and dark patches can indicate algae, mould or other biological growth, although appearance alone does not confirm the cause. Perth’s wetter months can encourage growth in sheltered areas that dry slowly.

If https://housewashingperth.com.au/ scrubbing removes the visible layer but it quickly returns, arrange an assessment. Effective treatment may require an appropriate product and sufficient contact time rather than repeated high-pressure blasting. Trim overhanging vegetation where practical and remove damp leaf litter to help the surface dry.

3. Sweeping and Gentle Washing No Longer Restore the Colour

Embedded dirt can leave concrete and paving looking uniformly grey or brown. A clear colour difference beneath a recently moved pot or outdoor table often reveals how much grime has accumulated.

Professional cleaning can remove many surface deposits, but it cannot reverse every form of fading, wear or discolouration. Ask for a small test patch, especially on coloured concrete, coated surfaces or natural stone, before approving the full clean.

4. Barbecue Grease and Oil Stains Remain

Cooking oil and grease can soak into porous paving. Hosing alone rarely removes absorbed contamination, and an uncontrolled wash can spread oily residue across the patio.

For fresh spills, absorb excess liquid promptly with a suitable absorbent material and follow the paving manufacturer’s cleaning guidance. Persistent stains may need targeted degreasing before pressure cleaning. Older, deeply absorbed marks may improve without disappearing completely.

5. Leaf, Rust or Reticulation Stains Are Building Up

Leaves can release tannins that stain paving, while metal furniture and some bore-water irrigation supplies can leave rust-coloured marks. These stains often need a different treatment from ordinary dirt.

Point out the likely source when requesting a quote. A professional should select a surface-compatible stain treatment rather than rely on extra pressure. Avoid applying acidic cleaners to limestone or other acid-sensitive stone, as they can etch the surface. Adjusting sprinkler coverage or replacing rusting furniture feet can help prevent repeat staining.

6. Grime Is Accumulating Around Joints and Edges

Paving joints, steps and patio edges often trap sediment that routine sweeping misses. Thick build-up can obscure loose pavers, damaged joints and uneven sections that need attention.

Have unstable paving assessed before cleaning. Pressure washing can dislodge jointing sand, so ask whether the service includes inspecting and replenishing joints where appropriate. Weeds also need separate attention: removing visible growth does not necessarily eliminate roots or prevent new seeds from germinating.

7. DIY Cleaning Leaves Stripes or Damages the Surface

Uneven bands, exposed aggregate, roughened stone or sand washing out of joints are reasons to stop pressure cleaning. These problems can result from excessive pressure, an unsuitable nozzle or holding the jet too close.

A professional should assess the material and condition before choosing equipment and settings. Some patios need lower-pressure cleaning with an appropriate treatment instead. Existing cracks, flaking surfaces and failing sealers should be discussed first, because cleaning may expose defects rather than repair them.

What to Ask a Perth Patio Cleaning Professional

Before booking, request a clear explanation of the proposed method and what the quoted price includes. Useful questions include:

  • Is the cleaning method suitable for my paving material and any existing sealer?
  • Will you test an inconspicuous area before treating the whole patio?
  • How will you protect plants, nearby finishes and outdoor electrical fittings?
  • How will wastewater, sediment and cleaning chemicals be contained and managed?
  • Does the quote include stain treatment, joint-sand replacement or any recommended follow-up work?

Water-use requirements can vary with the supply source and current restrictions. Check current Water Corporation guidance and relevant local requirements, and choose a contractor who manages runoff responsibly rather than allowing contaminated wash water into stormwater drains.

Keep Your Patio Cleaner Between Visits

Sweep away sand and leaves regularly, clean up food spills promptly and keep drainage paths clear. Move pots occasionally to check for trapped moisture, and use a suitable protective mat beneath the barbecue. Base professional cleaning on the patio’s condition rather than a fixed schedule: shaded, heavily used or frequently damp areas may need attention sooner than sheltered, well-drained paving.

House Washing Perth

(08) 7828 5551

Corrections

Spot something wrong? Send it to the desk and it gets fixed in the open.