On watchIndependent · Reader funded · No paywall
Local · 03:48

How to Remove Chewing Gum From Commercial Walkways Safely

By @cesaruowf048

Chewing gum is one of the most persistent forms of litter on commercial walkways. It bonds tightly to pavers, concrete, tiles and asphalt, and once it has been trodden on and flattened it can be very hard to shift. For property managers, shopping centre operators, office complexes and hospitality venues in Perth, gum creates unsightly black spots, tracks indoors on shoes and can contribute to slip risks. This guide explains why gum is so difficult to remove, which methods work on different surfaces, and how to protect your walkways and people while doing the job.

Why Chewing Gum Is So Hard to Remove

Most chewing gum is made from a synthetic polymer base, often similar to rubber or plastic, which does not dissolve in water. When gum is dropped on a walkway, foot traffic presses it into the microscopic pores of the surface. In Perth's warm climate, summer pavement temperatures can soften gum and push it deeper into porous materials like limestone, exposed aggregate and unsealed concrete. Once it cools, it hardens and grips the surface mechanically.

Regular sweeping and standard pressure cleaning with cold water will often leave a stain or a ghost mark behind. Gum needs either heat, freezing, specialised solvents or a combination of these to release it properly.

Safety Considerations Before You Start

Gum removal involves heat, chemicals and sometimes high-pressure equipment, so safety planning matters, especially in public or semi-public areas. In Western Australia, businesses have duties under the Work Health and Safety Act 2020 to manage risks to workers and others, including contractors and the public. Cleaning tasks are part of that obligation.

  • Personal protective equipment: Wear gloves, eye protection, non-slip closed footwear and, where hot water or steam is used, heat-resistant gloves and long sleeves.
  • Safety Data Sheets: Review the SDS for any solvent or chemical remover and follow the ventilation, storage and disposal instructions.
  • Barriers and signage: Cordon off the work area and place wet-floor or cleaning-in-progress signs to protect pedestrians.
  • Surface testing: Always test any product or technique on a small, inconspicuous area first.
  • Slip risk management: Make sure walkways are dry and residue-free before reopening them to foot traffic.

Main Methods for Removing Gum From Commercial Walkways

Hot Water Pressure Cleaning

Hot water pressure cleaning is one of the most effective methods for large areas with many gum spots. Water heated to around 90 to 100 degrees Celsius softens the gum base, while the pressure lifts it from the surface. Trained operators adjust pressure, nozzle type and distance to suit the material, since too much pressure can etch concrete, loosen paver sand or damage sealants. This method suits outdoor areas such as shopping precincts, bus stops, car parks and outdoor dining zones.

Steam Cleaning

Commercial steam cleaners use very hot, low-volume steam to soften gum so it can be scraped or wiped away. Steam uses less water than pressure cleaning, which is useful where drainage is limited or where runoff must be controlled. It also works well on textured and tiled surfaces, and the heat helps sanitise the area. Steam is particularly suited to covered walkways, entrances and indoor concourses.

Freezing Agents

Freeze sprays and cryogenic products make gum brittle so that it can be chipped off with a plastic or metal scraper. This approach is quick for isolated pieces and works on smooth, hard surfaces like polished concrete, vinyl and sealed tiles. On highly textured surfaces, freezing is less effective because brittle fragments can remain lodged in the grooves.

Solvent-Based and Citrus Gum Removers

Purpose-made gum removers soften the polymer so it can be wiped away. Citrus-based and biodegradable options are widely available and generally gentler than harsh petroleum solvents. Apply the product, allow the recommended dwell time, then agitate with a stiff nylon brush and rinse. Be cautious on sealed surfaces, natural stone and coloured concrete, as some solvents can strip sealers, dull finishes or discolour the material.

Mechanical Scraping

For thick deposits, a hand scraper or a specialised gum-removal tool can lift the bulk of the gum before heat or solvent is applied to the remaining residue. Use plastic or soft-edged blades on delicate surfaces to prevent scratching. Metal scrapers are suitable for rough concrete and asphalt but should be used with care.

Choosing the Right Method for Your Surface

Different walkway materials respond differently to gum removal techniques. Matching the method to the surface helps avoid damage and costly repairs.

  • Concrete and exposed aggregate: Hot water pressure cleaning is typically the best option, followed by a rinse to remove residue.
  • Clay and concrete pavers: Use controlled hot water or steam at moderate pressure to avoid dislodging jointing sand.
  • Limestone and natural stone: Choose gentle steam and pH-neutral products, and avoid acidic or aggressive solvents that can etch the stone.
  • Porcelain and ceramic tiles: Steam and freezing agents work well, with care taken around grout lines.
  • Asphalt and bitumen: Avoid strong solvents that can dissolve the binder. Hot water or freezing methods are safer choices.
  • Sealed or coated surfaces: Test first, as heat and chemicals can damage protective coatings.

Step-by-Step Process for Safe Gum Removal

A consistent process produces better results and reduces risk. The following approach is commonly used on commercial sites.

  1. Inspect the walkway, identify the surface type and map the heaviest gum concentrations.
  2. Set up barriers and signage, and check that drainage and runoff can be managed.
  3. Remove loose debris by sweeping or blowing the area clean.
  4. Test your chosen method on a small patch and check for discolouration or surface damage.
  5. Apply heat, steam, freezing agent or solvent to soften or embrittle the gum.
  6. Lift the gum with an appropriate scraper or agitate with a brush, working carefully to avoid scratching.
  7. Treat any remaining residue or staining, then rinse the area thoroughly.
  8. Collect wastewater and gum waste where required and dispose of it responsibly.
  9. Allow the surface to dry completely and check for slip hazards before reopening.

Environmental and Compliance Considerations in Perth

Wastewater from cleaning must not be allowed to enter stormwater drains, which in Perth lead to waterways such as the Swan and Canning Rivers, wetlands and the ocean. Water containing detergents, solvents or gum residue should be captured using drain covers, vacuum recovery systems or bunding, and disposed of to the sewer where permitted or through an appropriate waste service. Local governments and the Department of Water and Environmental Regulation provide guidance on stormwater protection, and many councils expect commercial cleaners to follow best practice.

Choosing biodegradable, low-VOC products also supports sustainability goals that more Perth businesses are adopting as part of their environmental, social and governance reporting. Water-efficient methods such as steam cleaning can help reduce consumption, which is relevant in a region with a dry climate and ongoing water-saving programs.

Preventing Gum Build-Up on Walkways

Removing gum is only part of the solution. Prevention reduces the frequency and cost of cleaning programs over time.

Provide Convenient Disposal Options

Place bins at building entrances, near transport stops, outside cafes and along high-traffic routes. Some venues install dedicated gum disposal stations, which can reduce littering when positioned in obvious locations.

Schedule Regular Maintenance

Fresh gum is far easier to remove than gum that has been compacted for months. A routine cleaning schedule, with more frequent attention to entrances, queuing areas and outdoor seating, prevents deposits from becoming embedded.

Consider Surface Sealing

Penetrating sealers on suitable concrete, pavers and stone can reduce how deeply gum and stains bond to the surface, making later removal easier. Always confirm compatibility with the existing surface and re-seal according to the manufacturer's guidelines.

When to Call a Professional Cleaning Service

Small, isolated pieces of gum can be handled by in-house maintenance staff with the right tools. Larger areas, high-traffic public spaces, delicate or heritage surfaces and sites with strict compliance obligations are better handled by professionals. Experienced commercial cleaners in Perth have access to hot water pressure cleaners, industrial steam units, wastewater recovery equipment and the training to match the method to the surface. They can also schedule work outside trading hours to limit disruption and provide documentation such as safe work method statements and proof of insurance.

When selecting a provider, ask about their experience with your surface type, how they manage wastewater, what products they use and whether they carry public liability insurance. A clear quote that specifies the area, method and frequency helps you compare services accurately.

Conclusion

Removing chewing gum from commercial walkways safely depends on choosing the right technique for the surface, protecting people and the environment during the work, and maintaining a prevention routine. Hot water pressure cleaning, steam, freezing and targeted solvents each have a https://housewashingperth.com.au/roof-cleaning/ place, and combining them with careful planning delivers clean, safe walkways that reflect well on your property. For large or sensitive areas across Perth, engaging a qualified commercial cleaning provider is often the most efficient and lowest-risk option.

House Washing Perth

(08) 7828 5551

Corrections

Spot something wrong? Send it to the desk and it gets fixed in the open.